MACHINE SET UP AND PACK UP
6308AN
Machine Pack Up
Packing up the machine for towing or
transport is a reversal of the setup
steps. Take special care when
lowering the boom and ensure it rests
neatly in the boom cradle at the rear of
the machine.
Ensure the light bar is stowed in
towards the mast and is locked against
the stop prior to towing.
The light bar tilt mechanism is
hydraulically locked into place during
transport. However, for added safety 2
turn buckles attached to the front of the
machine provide rigid support for
extended transport. The turnbuckles
need only be tightened “lightly” to
provide adequate support.
When retracting the rear outrigger
legs, ensure that they are pinned and
locked in the retracted position. Rotate
the outrigger jack 180 degrees and
turn the handle so that the jack pulls
down lightly on the rubber anti shake
pads as shown below.
Page 1-10