CONTROLS IDENTIFICATION
4108AN
rotated clockwise to lock mast prior
to use.
3. Mast rotate lockpin. This pin is
spring loaded into the locked
position. It must be pulled out prior
to rotating mast. The pin locks the
mast every 15 degrees. The mast
may be locked in any position by
using the rotate lock, however, in
exceptionally high winds the mast
may move slightly if it is positioned
between the 15
lockpin indents. It
will move to the nearest lockpin
position and the lockpin will engage
to prevent further movement.
Park Brake
Park Brake
The Park brake handle shown above
acts on the hydraulic master cylinder. It
is locked into position by the ratchet
locking bar. To apply the park brake,
pull the handle forward and lock the
ratchet bar into place as shown.
PRIOR TO TOWING THE VEHICLE,
ENSURE THE PARK BRAKE IS
RELEASED
AND
THAT
THE
RATCHET BAR IS SWUNG WELL
OUT OF THE WAY. FAILURE TO DO
THIS COULD CAUSE THE BRAKES
TO LOCK ON DURING TOWING.
!
Page 1-7
