JLG 1532R, Operation And Safety Manual

Page: 84 / 98

SECTION 5 - GENERAL SPECIFICATIONS AND MAINTENANCE
5-22 – JLG Lift – 3121744
Table 5-13. Diagnostic Trouble Codes (DTC)
DTC Help Message Alarm
Flash
Code
Action Trigger
001 EVERYTHING OK None None · No Motion restrictions • Platform Mode and no Faults are active.
002 GROUND MODE OK None None · No Motion restrictions • Ground Mode and no Faults are active.
003 ALARM SOUNDING – TILTED & ABOVE
ELEVATION PF: Continuous None · No Motion restrictions • Platform is elevated and chassis is not level
004 DRIVING AT CUTBACK – ABOVE ELEVA-
TION None None · DriveState = CREEP • Platform is elevated and the machine is in the drive mode of
operation
005 DRIVE & LIFT UP PREVENTED TILTED &
ELEVATED PF: Continuous None • DriveState = PREVENTED
• LiftUpState = PREVENTED • Driving and lift up are not possible since the platform is ele-
vated and the chassis is not level.
006 LIFT UP PREVENTED – MAX HEIGHT
ZONE A None None • LiftUpState = PREVENTED • The vehicle has reached the maximum height allowed by the
Indoor/Outdoor selection and further lift up motion is not
possible.
007 DRIVING AT CUTBACK – POTHOLE STILL
ENGAGED None None • DriveState = CREEP • While stowed, drive speed is reduced (due to lower ground
clearance) since the control system detected that the pot-
hole protection mechanism is deployed (failed to retract).
• Clear the obstacle blocking the pot-hole protection mecha-
nism, repair the mechanical problem, re-adjust the pot-hole
limit switches, or repair the wiring to correct the problem.
• Alternately, there may be difficulty with the Elevation Angle
Sensor that causes the Control System to improperly believe
the platform is stowed.