JLG 1532R, Operation And Safety Manual

Page: 31 / 98

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
3121744 – JLG Lift – 2-9
2.5 FUNCTION CHECK
Perform the Function Check as follows:
1. From the Ground Control Panel with no load in the
platform: (See Figure 3-2. on page 3-5)
a. Ensure that the key selector switch and the plat-
form lift switch operates properly.
b. Ensure that all machine functions are disabled
when the Emergency Stop Button is depressed.
c. With platform raised a few feet (1m), ensure that
the manual descent control
(T-handle located at
the left rear of the machine, next to the battery char-
ger),
lowers the platform properly.
d. Check that pot-hole-protection system bars are
fully lowered when the platform is raised.
.
2. From the Platform Control Console :
a. Ensure that the control console is firmly secured
in the proper location.
b. Ensure that all guards protecting switches are in
place.
c. Operate all switch functions, drive/lift mode
select switch, and horn button.
d. Operate all platform joystick functions to ensure
proper operation of drive, lift, steer, and enable
trigger switch operation.
Platform Elevated - Pot-Hole Bars Fully Lowered
Platform Fully Lowered - Pot-Hole Bars Raised
Pot-Hole-Protection System - Operation