manualshive.com logo in svg

JLG 1500SJ, Operation And Safety Manual

Share
Download
JLG 1500SJ Operation And Safety Manual Download Page 46

SECTION 3 - MACHINE CONTROLS AND INDICATORS

3-2

– JLG Lift –

3121261

TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE  SWITCHES  CONTROLLING  PLATFORM  MOVEMENT  DO  NOT  RETURN  TO  THE
OFF POSITION WHEN RELEASED.

Ground Control Station

See Figure 3-1., Ground Control Station and Figure 3-2., Ground Control
Station with Machine Safety System Override (MSSO) (CE Only).

NOTE:

The Function Enable switch must be held down in
order to operate Main Boom Telescope, Swing,
Main Lift, Jib Lift, Platform Level Override, Plat-
form Rotate, and Jib Telescope functions.

1.

Indicator Panel

The Indicator Panel contains indicator lights that signal
problem conditions or functions operating during machine
operation.

2.

Jib Telescope Control

Provides extension and
retraction of the jib.

3.

Platform Rotate

Provides rotation of the plat-
form.

Summary of Contents for 1500SJ























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands