manualshive.com logo in svg

JLG 1500SJ, Operation And Safety Manual

Share
Download
JLG 1500SJ Operation And Safety Manual Download Page 15

SECTION 1 - SAFETY PRECAUTIONS

3121261

– JLG Lift –

1-1

SECTION 1.  SAFETY PRECAUTIONS

1.1

GENERAL

This section outlines the necessary precautions for proper and
safe machine usage and maintenance. It is mandatory that a daily
routine is established based on the content of this manual to pro-
mote proper machine usage. A maintenance program, using the
information provided in this manual and the Service and Mainte-
nance Manual, must also be established by a qualified person and
must be followed to ensure that the machine is safe to operate.

The owner/user/operator/lessor/lessee of the machine must not
accept operating responsibility until this manual has been read,
training is accomplished, and operation of the machine has been
completed under the supervision of an experienced and quali-
fied operator.

This section contains the responsibilities of the owner, user, oper-
ator, lessor, and lessee concerning safety, training, inspection,
maintenance, application, and operation. If there are any ques-
tions with regard to safety, training, inspection, maintenance,
application, and operation, please contact JLG Industries, Inc.
(“JLG”).

FAILURE TO COMPLY WITH THE SAFETY PRECAUTIONS LISTED IN THIS MANUAL
COULD RESULT IN MACHINE DAMAGE, PROPERTY DAMAGE, PERSONAL INJURY OR
DEATH.

1.2

PRE-OPERATION

Operator Training and Knowledge

• The Operation and Safety Manual must be read and under-

stood in its entirety before operating the machine. For clarifi-
cation, questions, or additional information regarding any
portions of this manual, contact JLG Industries, Inc.

 

Summary of Contents for 1500SJ























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands