Similarly, to disable Port 1 in the above
example, press 0, 1. The display will show
similar to the screen shot below and the
Gangway will now only illuminate button 6.
To enable Port 12 in the above example,
press 1, 2. The display will show similar to
the screen shot below.
To enable all the ports on the Gangway16 or
Gangway32 for output, press the All On
button. The display will show:
To disable all the ports on the Gangway16 or
Gangway32 for output, press the All Off
button. The display will show:
To receive data (such as Timecode or Status)
back from the video device, a port for Tally
operation must be selected. This can be
done by pressing the Tally button. Pressing
Tally will illuminate the Tally LED and cause the display to show the
following:
The down pointing arrow will indicate the port that is configured as the Tally
port or the port that the SloMo Mini listens to for Timecode and Status
responses.
As with the Enable function, to enable a port on the Gangway for Tally,
make sure that the Tally LED is illuminated then, key in the 2 digit entry on
the numeric keypad for the port. For example, to select Port 9 for Tally,
press 0, 9. The display will be similar to the screen shot below.
To remove the Gangway16 or Gangway32
configuration pages, simply press the Enable
button. This will cause the display to revert to
normal operation.
1234567890123456
↑
1234567890123456
↑
↑
1234567890123456
↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑
1234567890123456
1234567890123456
!
1234567890123456
!
SloMo Mini User Manual
41
