These buttons also allow you to 'gang roll' multiple video devices. To
do this, press and hold any of the 4 buttons you wish to control and
then press additional buttons while still holding the first button. The
timecode and status from the held button is displayed on the SloMo
Mini.
Refer to the
Machine Control
section for more detail.
Cueing Functions
Manual Time
Pressing this button allows you to enter a specific timecode location
and have the video device to to that location, if it is valid and exists.
Simply press the Manual Time button, enter the timecode you wish to
locate to using the numbered keypad and press the Enter button.
This illuminates while the SloMo Mini is waiting for user input.
Refer to the
Cue Operations
section for more detail.
CLR ESC
Pressing this button causes the SloMo Mini to erase and exit the
pending Manual Time entry.
Refer to the
Cue Operations
section for more detail.
Mark In / Mark Out
Pressing either of these buttons causes the SloMo Mini to temporarily
store the current timecode for Instant Replay and Cue/Clip Store
functions.
Refer to the
Cue Operations
section for more detail.
Store Cue
Pressing this button causes the SloMo Mini to store the current Mark
In and Mark Out points for Cue/Clip Store functions.
This illuminates to indicate that the Mark In and Mark Out points have
been defined are waiting to be stored. The SloMo Mini is waiting for
the user to press the Enter or CLR/ESC button.
Refer to the
Cue Operations
section for more detail.
Last Cue, Next Cue
Pressing either of these buttons causes the recall the next or
previous stored Cue or Clip. The Cue or Clip is not recalled until the
Enter button is pressed.
SloMo Mini User Manual
15
