•
Turn the Jog wheel so that the value is set to
Enabled
.
•
Press MENU to exit the menu.
Gangway16 or Gangway32 Controls
When Gangway Operation is enabled in the menu, the Machine Control
buttons and LEDs are repurposed to control the Gangway16 or
Gangway32 (Ports 1-16 only). In this case, the functions of the buttons and
LEDs are as follows:
A
Enable
B
All On
C
All Off
D
Tally
Enable
Pressing this button enters the Gangway16 or Gangway32
configuration mode. In this mode, the Enable LED will illuminate and
the VFD will show the Gangway16 or Gangway32 routing.
All On
When this button is pressed, the Gangway is configured to enable all
16 ports.
All Off
When this button is pressed, the Gangway is configured to disable all
16 ports.
Tally
Pressing this button allows you to select the port, which provides Tally
information (timecode, status) to the SloMo Mini. In this mode, the
Tally LED will illuminate and the VFD will show the Gangway16 or
Gangway32 Tally routing.
> Gangway Oper.
Enabled
SloMo Mini User Manual
39
