command sent would be selected by the "T-Bar Message" below unless
set at exactly Play speed, in which case a Play message will be sent.
•
Active
Movement of the T-Bar immediately sends an appropriate command to
machine when Enable LED is on.
5.
T-Bar Speed Min
This sets the minimum speed to be sent by the T-Bar in Normal Mode when the
T1 (Scaling) button is active.
Note: Due to limitations of the P2 protocol, these speeds may not be exact.
•
Still
•
1/64x
•
1/32x
•
3/64x
•
1/16x
•
3/32x
•
1/8x
•
3/16x
•
1/4x
•
3/8x
•
1/2x
•
3/4x
6.
T-Bar Speed Max
This sets the maximum speed to be sent by the T-Bar in Normal Mode when the
T1 (Scaling) button is active.
Note: Due to limitations of the P2 protocol, these speeds may not be exact.
•
1x
•
1
½
x
•
2x
•
4x
•
8x
•
10x
7.
T-Bar Speed Preset
Sets the Preset Speed to be evoked by pressing the Preset Button.
Note: Due to limitations of the P2 protocol, these speeds may not be exact.
•
Still
•
1/64x
•
1/32x
•
3/64x
•
1/16x
•
3/32x
•
1/8 x
•
3/16x
•
1/4x
•
3/8x
•
1/2x
•
3/4x
•
1x
•
1
½
x
•
2x
•
4x
8.
T-Bar Message
This sets the type of command sent by SloMo Mini during T-Bar operations
•
Jog Msgs
•
Variable Msgs
•
Shuttle Msgs
9.
Stop --> T-Bar
This determines if pressing the STOP, PLAY, R-PLAY, REW or FFWD button will
disable the T-Bar and turn off ENABLE LED.
•
No Effect
SloMo Mini User Manual
19
