34
JLA Limited
113372 - 16
K. PREOPERATIONAL INSTRUCTIONS
1. To start the dryer:
a. Non-Coin Microprocessor Controller (Computer) Dryers...
1) Light emitting diode (L.E.D.) display will read “REAdY” (meaning no cycle in progress).
2) Press the letter on the keyboard (touch pad) corresponding to the cycle desired (i.e., key “E”)...
a) The dryer will then start (rotate).
3) L.E.D. display will now show “Cycle In Progress” and “Cycle Status” meaning that the dryer is in
the drying cycle (dry mode for 30 minutes) and count downwards in minutes.
NOTE: The dryer can be stopped at any time by opening the main door or by pressing the “STOP”
red key. To restart the dryer, press the “START” green key or a preprogrammed cycle
key (i.e., “E”).
b. Dual Timer Dryers
1) Select drying time and cool down time desired...
a) Turn heat timer clockwise (CW) to the desired time (i.e., 1 minute to 60 minutes).
b) Turn cool down timer clockwise (CW) to the desired time (i.e., 0 minutes to 15 minutes).
2) Select drying temperature (“HI TEMP,” “LO TEMP,” or “PERM PRESS”).
3) Push “Push to Start” button...
a) Dryer will now start.
4) To stop the dryer, open the main door.
Summary of Contents for D75
Page 52: ...Part No 113372 16 11 12 15 ...
