Continued on Next Page
SMS-F150-SPRCRW INSTR_SKU# 011341
Page 11 • JL Audio, Inc., 2013
S T E P 6 0
Carefully unclip the USB/Auxilliary trim panel to access the
screw as shown. Unplug the two harnesses, remove the
panel, and remove the screw.
S T E P 6 4
Using the color code in the previous step as a guide, connect
the Speaker Wire to RCA Adaptors to the plug side wires,
and connect the 16 AWG Speaker Cable to the wire side.
Connect the Audio Interconnects to the Speaker Wire to RCA
Adaptors with the supplied barrel connectors.
S T E P 6 3
Cut the front and rear speaker wires a few inches away from
the factory plug. Use this color code as a guide:
Left Front (+) = white
Left Front (-) = white/brown
Right Front (+) = white/violet
Right Front (-) = white/orange
Left Rear (+) = white/green
Left Rear (-) = brown/yellow
Right Rear (+) = brown/white
Right Rear (-) = brown/blue
S T E P 5 8
Carefully slide the passenger airbag over to access the
bezel screws. It’s recommended to protect the dash from
scratches with tape or a rag as shown.
S T E P 6 2
Unscrew the four screws holding in the head unit. Unplug
the harnesses and remove the head unit.
S T E P 5 7
Remove the three bolts above the glove compartment to
release the passenger airbag.
S T E P 6 1
Carefully unclip and remove the dash bezel.
S T E P 5 9
Remove the two screws, then carefully unclip and remove
the passenger side dash trim bezel.
