background image

I N S T A L L A T I O N   G U I D E 

for the 

SMS-F150-SPRCRW/PREM

SMS-F150-SPRCRW/BAS 

SKU# 94550 and 94551

2009 & Up Ford F150 SuperCrew   

Thank you for choosing a JL Audio StealthMod® System for your automotive sound system.  

With proper installation, your new vehicle-specific audio system  

will deliver years of listening pleasure.

We strongly recommend that you have your new StealthMod® System installed by your authorized  

JL Audio dealer. The installation professionals employed by your dealer have the necessary tools 

and experience to disassemble and reassemble your vehicle properly.  If you prefer to perform your 

own installation, please read this installation guide completely before beginning the process.

  

If you choose to perform the installation yourself, it is absolutely vital that 

the Stealthbox

®

 be properly mounted to the vehicle according to these 

instructions.  Failure to mount the enclosure properly presents two problems:  
1) The sub-bass performance will suffer due to the movement of the enclosure 

caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision 

or sudden deceleration.

Continued on Next Page 

SMS-F150-SPRCRW  INSTR_SKU# 011341

INSTALLATION  

D I F F I C U L T Y :

4

5

OUT   

OF

ESTIMATED TIME:

         5-6 HOURS

S T E A L T H B O X ®   S P E C I F I C A T I O N S

Enclosure Type:

  Sealed

Driver Type:

  13TW5v2-2

Nominal Impedance:

  2 ohms

Continuous Power Handling:

  600 watts (RMS method)

I N C L U D E D   E Q U I P M E N T

(1) C3-570 Speakers
(1) XD700/5 Amplifier
(1) HD-RLC

I N C L U D E D   H A R D W A R E

(2) Crossover Brackets                                   (2) Foam Tape
(1) F150 Amplifier Bracket                              (1) 60 Amp Power Wire                                  
(1) 60 Amp Ground Wire                               (1) XD-MFB-MAXI Master Fuse Block 
(2) 4 Gauge Ring Terminals                           (1) 60 Amp MAXI Fuse
(1) Remote Turn-on Wire                               (1) XB-MGLU Master Ground Lug
(1) Mini Fuse Add-A-Circuit                           (3) 1/4 - 20 x 1” Bolt
(1) 3 Amp Mini Fuse                                       (3) 1/4” Lock Washer
(1) 10 Amp Mini Fuse                                     (3) 1/4” Flat Washer
(1) 16 Gauge Speaker Cable                          (3) 1/4 - 20 U-Nut
(1) 12 Gauge Speaker Cable                          (8) Speed Clip                                                 
(4) 10 - 24 x 3/8” Machine Screw                  (4) #8 x 3/4” Screw
(4) #8 x 1” Phillips Pan Head Screw               (4) 10 - 24 Keps Nut

Premium Model Only

                             

 Basic Model Only

(1) CL-LSA Load Sensing Adaptor                (2) Speaker Wire to RCA Adaptor
(1) CL-LSA Speaker Input Harness                (2) XD-CLRAICY1F2M Y-adaptor
(1) CL-LSA RCA Output Harness                   (2) XD-CLRAIC2-12 Audio Interconnect
(2) XD-CLRAIC2-9 Audio Interconnect

 

 

StealthMod

®

Summary of Contents for 94550
















Reviews: