Appendix
98/110
16
Appendix
16.1
Model-No.: JK 127 ...:
EMC information
16.1.1
Table 201: Guidelines and manufacturer's
declaration – Electromagnetic emissions
The Tanning system has been designed for use in the electromagnetic envi-
ronment specified below. The device operator must ensure that it is used in
such an environment.
Emission measurements
Conformity Electromagnetic environment – Guidelines
HF emissions as per CISPR 11 Group 1
Model-No.: JK 127 ... uses HF power mostly for internal functions.
Therefore the HF emissions are very low and it is highly unlikely that it
will cause any interference to adjacent electronic equipment.
HF emissions as per CISPR 11 Class B
Model-No.: JK 127 ... has been designed for use in all devices, includ-
ing those in residential areas, and it has been determined that it can be
used for residential purposes as soon as it is connected up to a public
mains supply that also supplies buildings.
Harmonics
IEC 61000-3-2
Class A
Voltage fluctuations / Flicker
IEC 61000-3-11
Fulfilled
The obligations listed in Sub-section 6.2.2 of EN 61000-3-11:2000 must
be taken into consideration. In particular, the 0.14 ohm line impedance
must be guaranteed.