How to use this device
04/2019
1013658-03B
Operating instructions – 83/110
–
Remove the ninth low pressure lamp in the canopy so that you can then
access the facial tanner's low pressure lamp starter.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Re-lock the locks: first the lock in the middle, then the outer locks.
12.16.9
Cleaning or replacing the lamps in the
shoulder tanner
WARNING!
Danger of burns from hot lamps and device parts!
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
–
Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
–
If an enclosed tanning tunnel is fitted: Remove the screws and then re-
move the tanning tunnel.
–
Remove one screw from each housing.
–
Remove both housings and carefully lay them aside.
Changing the high pressure lamps: see page 79.
14755 / 1