How to use this device
72/110
The assembly is the same process in reverse order.
When assembling the device please note:
–
You must ensure that the recesses are at the foot end when you fit the
partition.
–
Lift the acrylic up slightly and then close it.
Remove the canopy panel
–
Turn the locks through 90°: first the outer locks, then the lock in the mid-
dle.
–
Support the canopy panel with one hand so that it does not fall down.
–
Carefully lay the panel aside on the scratch protection (service kit).
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Re-lock the locks: first the lock in the middle, then the outer locks.
14743 / 1
14755 / 1