PAGE 115 of 140
DP0029 Rev 02.2
7.3. Maintenance Schedule
The
SKOOT HT
system must be maintained according to the following schedule:
Task
Frequency
Inspect safety apparatus
This includes:
►
All components of tether system. Replace damaged
components as necessary.
Every Use
Clean the drive wheels
Debris will collect on the magnetic wheels. Remove this debris
before every use. An effective cleaning method uses adhesive-
backed tape
(e.g. duct tape)
to ‘pull’ the debris off the wheels.
Every Use
Inspect cables and connectors
Inspect the umbilical cable, the control cable and the power
controller cable for damage. Have any damaged cable repaired
by a qualified person or replace the cable assembly as
necessary.
Inspect all connectors for damage or moisture. Straighten bent
pins. Dry connectors before using.
Every Use
General cleaning
Ensure that the scanner stays relatively clean by wiping off any
excess dirt or other contaminants after every use.
Every Use
