2/55
3.3.6 DC level
3.3.7 deviation test function
3.4< user correction > page
3.4.1 open circuit correction
3.4.2 short circuit correction
3.5 < limit table setting > page
3.5.1 tuning parameters
3.5.2 comparative functional limit mode
3.5.3 tolerance mode nominal value setting
3.5.4 Comparator function ON/OFF
3.5.5 Auxiliary BIN ON/OFF
3.5.6 Upper and lower limits
Chapter four [SYSTEM]Menu key description and file management
4.1 < System Settings > page
4.1.1 instrument function
4.1.2 Keystroke sound
4.1.3 U disk switch
4.1.4 display language
4.1.5 Menu disping
4.1.6 time
Chapter five
Performing LCR measurement operations and some examples
5.1 ”Zero clearing” correction operation
5.1.1 Full frequency reset
5.1.2 Point frequency zero(It is better to use a single frequency test.)
5.2 The correct connection of the tested components
5.3Eliminating the influence of stray impedance
5.4 JK2817N test inductor fast operation example
5.5 JK2817N used for multi frequency list scanning to test capacitance fast operation
5.6 Comparator setup instance
5.6.1 Capacitor sorting
5.6.2 Load calibration operation example
Chapter six
Performance and testing
6.1 measuring function
6.1.1 measurement parameters and symbols
6.1.2 equivalent mode
6.1.3 range
6.1.4 triggering
6.1.5 trigger delay
6.1.6 test end connection mode
6.1.7 measurement speed (frequency >=10kHz)
6.1.8 averag
6.1.9 display digit
6.1.10 test signal frequency
6.1.11 signal mode
Summary of Contents for JK2817N
Page 1: ......
