20/55
In the < measurement Settings > page, the following measurement control parameters can be
set.(brackets are set fields)
● Test function (function)
● Test frequency (frequency)
● Test level (level)
● Test range (range)
● Test speed (speed)
● Trigger mode (trigger)
● Output resistance (internal resistance)
● Voltage and current monitoring ON/OFF (V/I monitoring)
● DC resistance polarity (DCR polarity)
● Trigger delay (trigger delay)
● Step delay (step delay)
● DC resistance range (DC range)
● DC resistance level (DC level)
● Deviation test A mode (deviation A)
● Deviation test B mode (deviation B)
● Deviation test A reference value (reference A)
● Deviation test B reference value (reference B)
Some of the settings in the
＜
Measurement Settings
＞
page are the same as those in the
<Component Measurement Display >page, The settings are listed below. These settings were
explained earlier and are not explained in this section.The other settings in the page will be
described in detail in the following paragraphs.
●
Test function(Function)
●
Test frequency (frequency)
●
Test level (level)
●
Test range (range)
●
Test speed (speed)
3.3.1 Trigger mode
JK2817N has the following 4 trigger modes: INT (internal trigger), MAN (manual trigger), EXT
Summary of Contents for JK2817N
Page 1: ......
