35
11 .
Speed ”Nor” / ”Boost”
Briefly press the selection button in the menu to select the setting
and choose between ”NOR“ and ”BOOST“ by pressing the naviga-
tion buttons Up and Down. Confirm the setting by briefly pressing
the selection button.
Note:
Our JINBEI flashes can be operated using both the „NOR“ and
„BOOST“ settings. The setting depends on the firmware used or has
to be adjusted on the flash.
12 .
Power
Here you set the power output of the radio signal. You can select
the power level between MIN (minimum: 18 dBm), NOR (medium: 20
dBm) and MAX (maximum: 22 dBm). Use a higher power level the
further away the radio transmitter and flash are from each other.
13 . Flash (w)
Here you set the power according to the flash you are using (200 W /
400 W / 600 W / 800 W / 1200 W / 1600 W). This assists the accuracy
of the exposure when using TTL mode.
14 . CH recommend
Since the wireless frequency of this radio trigger is 2.4 GHz, it will
automatically search and recommend a suitable channel to avoid
frequency overlap with other electronic devices in the working en-
vironment that use the same frequency.
Functions
