37
7. Press the navigation button Right / modeling light/ zoom adjust-
ment button [12] to activate or deactivate the modeling light of the
flash.
8. Press the Navigation button Left / Shutter sound/ collective selec-
tion button [6] to switch the flash signal sound on or off.
Wireless zoom control for clip-on flashes
Press the Right Navigation button / Modeling Light / Zoom Setting
button [12] for 3 seconds and the transmitter will change to the zoom
setting. To zoom, briefly press the Select button to select the desired
group and adjust the desired zoom using the Up and Down navigation
buttons.
Note:
The function is only available with clip-on flashes that support
this feature.
Note:
Please note that some settings have to be changed directly via
the camera menu and not via the transmitter. This is especially the
case with Canon*/Nikon* cameras. Please refer to the manual of your
camera. With some camera models it is possible that the flash settings
of the camera overwrite the settings of the transmitter with their own
values.
It is not guaranteed that all camera models are always supported.
There may also be restrictions in the functionality or in combinations
of different technical possibilities.
Operation
