USR-WIFI232-A/B/C User Manual
http://www.usriot.com
Jinan USR IOT Technology Limited
Page 55 of 93
UARTFL
Set/Query UART auto-frame trigger length
TMODE
Set/Query data transmission mode
(transparent transmission or agreement transmission)
WMODE
Set/Query WIFI work mode (AP or STA)
WSKEY
Set/Query WIFI security parameters as STA
WSSSID
Set/Query WIFI target AP SSID parameters as STA
WSLK
Query WiFi link status as STA
WEBU
Set/Query WEB page login parameters
(User Name and Password)
WAP
Set/Query WIFI parameters as AP
WAKEY
Set/Query WIFI security parameters as AP
HIDESSID
Set/Query hide AP’s SSID
MSLP
Set modules into power save mode.(Turn OFF WiFi)
WSCAN
Seek AP when module works as STA mode
TCPLK
Query if TCP link already build-up
TCPDIS
Open/Cose TCP (Only TCP Client available)
WANN
Set/Query WAN setting, only effective as STA mode
LANN
Set/Query LAN setting, only effective as AP mode
DHCPDEN
Enable/Disable LAN DHCP server function
DHCPGW
Set/Query DHCP gateway address
TCPTO
Set/Query TCP timeout
MAXSK
Set/Query maxima TCP connection
TCPB
Open/Close TCPB function
TCPPTB
Set/Query TCPB port number
TCPADDB
Set/Query TCPB server address
TCPTOB
Set/Query TCPB time out time
TCPLKB
Query TCPB link status
EPHY
Open/Close ETH interface
STTC
Enable/Disable STA port scan function
DOMAIN
Set/Query domain of module webpage
RELD
Restore to factory default setting
FUDLX
Open / close the 485 function
MMID
Device ID
IDFIR
Send an ID when module connection is established
IDEVE
Every time to send data to send ID
AABR
Open / close baud rate adaptive function
MID
Query module ID information
VER
Query module software version information
H
Help
WSSSIDA
Set/query the first AP‘s ssid of 3 sta parameters settings
WSSSIDB
Set/query the second AP‘s ssid of 3 sta parameters settings
WSSSIDC
Set/query the third AP‘s ssid of 3 sta parameters settings
WSKEYA
Set/query the first AP‘s
password
of 3 sta parameters settings
WSKEYB
Set/query the second AP‘s
password
of 3 sta parameters settings
WSKEYC
Set/query the third AP‘s
password
of 3 sta parameters settings
WSQY
Set/query the critiacl value of network switching
HTPMODE
The switch of new/old HTTP headers setting mode(HTTPD Client)
HTPSV
Under the new mode,Settings/query server and IP address(HTTPD
Client)
HTPTP
Under the new mode,Settings/query request type(HTTPD Client)
HTPURL
Under the new mode,setting/query request path(HTTPD Client)
HTPHEAD
Under the new mode,Settings/query the HTTP header(HTTPD