background image

S&C SpeedNet™ SDR Software Defined Radio

April 2, 2018
©  S&C Electric Company 2015-2018, all rights reserved

Instruction Sheet  1075-510

NOTICE

The latest SpeedNet SDR Radio Instruction Sheets are posted as 
PDF documents at 

sandc.com/en/support/product-literature/

If you need assistance, please contact S&C’s Customer Support & 
Monitoring Center at 888-762-1100.

Installation

Table of Contents

Section Page

Section Page

Introduction

Qualified Persons  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this Instruction Sheet   . . . . . . . . . . . . . . . . . . . . . . 2
Proper Application  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Retain this Instruction Sheet   . . . . . . . . . . . . . . . . . . . . . 2
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Special Warranty Qualifications  . . . . . . . . . . . . . . . . . . . 4
Antenna Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Information

Understanding Safety-Alert Messages   . . . . . . . . . . . . . 5
Following Safety Instructions  . . . . . . . . . . . . . . . . . . . . . 5
Replacement Instructions and Labels  . . . . . . . . . . . . . . 5

Safety Precautions  . . . . . . . . . . . . . . . . . . . . . . . . .

5

Shipping and Handling

Inspection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

Installation

Before Starting Installation . . . . . . . . . . . . . . . . . . . . . . . 8
Network Design   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cable Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Antenna/Cable Installation Requirements  . . . . . . . . . . . 8
IP Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Subnet Masking  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Private Subnets   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MAC Address  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Network Example  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Routing Options  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using Static Routes  . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Interface Pinouts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Summary of Contents for SpeedNet SDR Series

















Reviews: