Jinan USR IOT Technology WIFI232-A, User Manual

Page: 67 / 93

USR-WIFI232-A/B/C User Manual http://www.usriot.com
Jinan USR IOT Technology Limited Page 67 of 93 tec@usr.cn
� On: Open Ethernet port function;
If you want to keep the Ethernet port open,please use the AT+FEPHY=on.
Close module’s Ethernet port function can reduce the power consumption. The default setting for
USR-WIFI232-A/B/C is close Ethernet port function.
Use AT + FVEW = disable/enable, so you can set the modules work in LAN port (disable) or wan port
(enable), the directive restore factory Settings to take effect.
5.2.2.2.33 5.2.2.2.33 5.2.2.2.33 5.2.2.2.33 AT+ AT+ AT+ AT+STTC STTC STTC STTC
�
Function: Enable/Disable STA port scan function
�
Format:
� Query Operation
AT+
AT+ AT+
AT+STTC
STTC STTC
STTC<CR>
<CR> <CR>
<CR>
+ok +ok +ok +ok=<sta> =<sta> =<sta> =<sta><CR>< <CR>< <CR>< <CR>< LF LF LF LF ><CR>< ><CR>< ><CR>< ><CR>< LF LF LF LF > > > >
�
Set Operation
AT+STTC=<on/off><CR> AT+STTC=<on/off><CR> AT+STTC=<on/off><CR> AT+STTC=<on/off><CR>
+ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF> +ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF>
�
Parameters:
� Sta: when query, this value feedback
�
On: Enable STA port scan function
� Off: Disable STA port scan function
5.2.2.2.34 5.2.2.2.34 5.2.2.2.34 5.2.2.2.34 AT+DOMAIN AT+DOMAIN AT+DOMAIN AT+DOMAIN
�
Function: Set/Query domain of module webpage;
�
Format
�
Query Operation
AT+DOMAIN<CR> AT+DOMAIN<CR> AT+DOMAIN<CR> AT+DOMAIN<CR>
+ok=<domian><CR><LF><CR><LF> +ok=<domian><CR><LF><CR><LF> +ok=<domian><CR><LF><CR><LF> +ok=<domian><CR><LF><CR><LF>
�
Set Operation
AT+DOMAIN=<domain><CR> AT+DOMAIN=<domain><CR> AT+DOMAIN=<domain><CR> AT+DOMAIN=<domain><CR>
+ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF> +ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF>
� Parameters:
�
domain: domain to access to module webpage
5.2.2.2.35 5.2.2.2.35 5.2.2.2.35 5.2.2.2.35 AT+FUDLX AT+FUDLX AT+FUDLX AT+FUDLX
� Function: Enable/Disable 485 function;
�
Format:
� Query Operation
AT+F
AT+F AT+F
AT+FUDLX
UDLX UDLX
UDLX<CR>
<CR> <CR>
<CR>
+ok=<on/off><CR><LF><CR><LF> +ok=<on/off><CR><LF><CR><LF> +ok=<on/off><CR><LF><CR><LF> +ok=<on/off><CR><LF><CR><LF>
�
Set Operation
AT+F AT+F AT+F AT+FUDLX UDLX UDLX UDLX=<on/off><CR> =<on/off><CR> =<on/off><CR> =<on/off><CR>
+ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF> +ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF>
�
Parameters:
� On/off: Enable or Disable 485 function
�
On, enable 485 function;
� Off, disable 485 function;