Jinan USR IOT Technology WIFI232-A, User Manual

Page: 66 / 93

USR-WIFI232-A/B/C User Manual http://www.usriot.com
Jinan USR IOT Technology Limited Page 66 of 93 tec@usr.cn
After USR-WIFI232-A/B/C module boots up again, the setting will be effective.
5.2.2.2.29 5.2.2.2.29 5.2.2.2.29 5.2.2.2.29 AT+TCPADDB AT+TCPADDB AT+TCPADDB AT+TCPADDB
�
Function: Set/Query TCPB server address;
� Format:
�
Query Operation
AT+TCPADDB<CR> AT+TCPADDB<CR> AT+TCPADDB<CR> AT+TCPADDB<CR>
+ok=<add><CR>< +ok=<add><CR>< +ok=<add><CR>< +ok=<add><CR>< LF LF LF LF ><CR>< ><CR>< ><CR>< ><CR>< LF LF LF LF > > > >
�
Set Operation
AT+ AT+ AT+ AT+ TCPADDB=<add><CR> TCPADDB=<add><CR> TCPADDB=<add><CR> TCPADDB=<add><CR>
+ok<CR><
+ok<CR>< +ok<CR><
+ok<CR>< LF
LF LF
LF ><CR><
><CR>< ><CR><
><CR>< LF
LF LF
LF >
> >
>
� Parameters:
�
add: TCPB server address, can be IP address or url.
After USR-WIFI232-A/B/C module boots up again, the setting will be effective
5.2.2.2.30
5.2.2.2.30
5.2.2.2.30 5.2.2.2.30 AT+TCPTOB
AT+TCPTOB
AT+TCPTOB AT+TCPTOB
�
Function: Set/Query TCPB time out time;
� Format:
�
Query Operation
AT+TCPTOB<CR> AT+TCPTOB<CR> AT+TCPTOB<CR> AT+TCPTOB<CR>
+ok=<time><CR><
+ok=<time><CR>< +ok=<time><CR><
+ok=<time><CR>< LF
LF LF
LF ><CR><
><CR>< ><CR><
><CR>< LF
LF LF
LF >
> >
>
� Set Operation
AT+
AT+ AT+
AT+ TCPTOB=<time><CR>
TCPTOB=<time><CR> TCPTOB=<time><CR>
TCPTOB=<time><CR>
+ok<CR>< +ok<CR>< +ok<CR>< +ok<CR>< LF LF LF LF ><CR>< ><CR>< ><CR>< ><CR>< LF LF LF LF > > > >
�
Parameters:
�
time: TCPB time out time, <=600 (600s), >=0 (No time out), default 0
After USR-WIFI232-A/B/C module boots up again, the setting will be effective.
5.2.2.2.31 5.2.2.2.31 5.2.2.2.31 5.2.2.2.31 AT+TCPLKB AT+TCPLKB AT+TCPLKB AT+TCPLKB
� Function: Query TCPB link status;
�
Format:
AT+TCPCKB<CR> AT+TCPCKB<CR> AT+TCPCKB<CR> AT+TCPCKB<CR>
+ok=<sta><CR><
+ok=<sta><CR>< +ok=<sta><CR><
+ok=<sta><CR>< LF
LF LF
LF ><CR><
><CR>< ><CR><
><CR>< LF
LF LF
LF >
> >
>
�
Parameters:
� sta: TCPB link status
�
on, TCPB link OK
� off, TCPB link not available
5.2.2.2.32 5.2.2.2.32 5.2.2.2.32 5.2.2.2.32 AT+EPHY AT+EPHY AT+EPHY AT+EPHY
� Function: Open/Close ETH interface;
�
Format:
�
Set Operation
AT+
AT+ AT+
AT+ EPHY=<on/off><CR>
EPHY=<on/off><CR> EPHY=<on/off><CR>
EPHY=<on/off><CR>
+ok<CR>< +ok<CR>< +ok<CR>< +ok<CR>< LF LF LF LF ><CR>< ><CR>< ><CR>< ><CR>< LF LF LF LF > > > >
� Parameters:
�
On/off
� Off: Close Ethernet port function;