Jinan USR IOT Technology WIFI232-A, User Manual

Page: 61 / 93

USR-WIFI232-A/B/C User Manual http://www.usriot.com
Jinan USR IOT Technology Limited Page 61 of 93 tec@usr.cn
This Instruction only effective for USR-WIFI232-A/B/C works as AP. After USR-WIFI232-A/B/C module
boots up again, the setting will be effective. But user can set this command when module configured
as STA.
5.2.2.2.15 5.2.2.2.15 5.2.2.2.15 5.2.2.2.15 AT+WAKEY AT+WAKEY AT+WAKEY AT+WAKEY
� Function: Set/Query WIFI security parameters as AP;
�
Format:
�
Query Operation
AT+WAKEY<CR> AT+WAKEY<CR> AT+WAKEY<CR> AT+WAKEY<CR>
+ok=<auth,encry,key><CR><
+ok=<auth,encry,key><CR><
+ok=<auth,encry,key><CR>< +ok=<auth,encry,key><CR>< LF
LF
LF LF ><CR><
><CR><
><CR>< ><CR>< LF
LF
LF LF >
>
> >
� Set Operation
AT+
AT+ AT+
AT+ WAKEY=<
WAKEY=< WAKEY=<
WAKEY=< auth,encry,key><CR>
auth,encry,key><CR> auth,encry,key><CR>
auth,encry,key><CR>
+ok<CR>< +ok<CR>< +ok<CR>< +ok<CR>< LF LF LF LF ><CR>< ><CR>< ><CR>< ><CR>< LF LF LF LF > > > >
�
Parameters:
�
auth: Authentication mode
�
OPEN
� SHARED
�
WPAPSK
� encry:Encryption algorithm
�
NONE: When “auth=OPEN”, effective;
� WEP: When “auth=OPEN”, effective or “SHARED”, effective;
�
TKIP: When “auth=WPAPSK”, effective;
�
AES:When “auth=WPAPSK”, effective;
�
TKIPAES:When “auth=WPAPSK”, effective;
�
key: password, ASCII code, shall less than 64 bit and greater than 8bit;
This Instruction only effective for USR-WIFI232-A/B/C works as AP. After USR-WIFI232-A/B/C module
boots up again, the setting will be effective. But user can set this command when module configured
as STA.
5.2.2.2.16
5.2.2.2.16 5.2.2.2.16
5.2.2.2.16 AT+HIDESSID
AT+HIDESSID AT+HIDESSID
AT+HIDESSID
�
Function: Set/Query hide AP’s SSID;
�
Format:
� Query Operation
AT+HIDSSID<CR>
AT+HIDSSID<CR>
AT+HIDSSID<CR> AT+HIDSSID<CR>
+ok=<sta.><CR><LF><CR><LF> +ok=<sta.><CR><LF><CR><LF> +ok=<sta.><CR><LF><CR><LF> +ok=<sta.><CR><LF><CR><LF>
�
Set Operation
AT+HIDSSID=<sta><CR> AT+HIDSSID=<sta><CR> AT+HIDSSID=<sta><CR> AT+HIDSSID=<sta><CR>
+ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF> +ok<CR><LF><CR><LF>
+ok<CR><LF><CR><LF>
�
Parameters:
�
When Query,sta reply if module’s SSID is hide;
�
On-not hide SSID
� Off- hide SSID
�
When Set,
� Off-hide SSID