3
Storage and Maintain
1)
Clean the product with clear water, then leave it in shady and cool place for
airing, fold it into original package and place it indoor for next use.
Caution:
Do not use the alkali or acid detergent to clean product! Do not leave product
exposed under sunlight directly because it will shorten the using-life of
product.
2)
Fold the airbed loosely and avoid sharp bends, corners and creases which can
damage the airbed.
3)
No specific maintenance is required for electric pump.
4)
Place the airbed inside the storage bag and store in a dry and room
temperature location indoors. Do not store in an area where it is likely to be
exposed to extreme temperature.
Repair Patch Instructions
Small pinhole and small puncture leaks can be repaired with the included repair patch
a) Locate the leak place.
b) Deflate and drain the water.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it into required shape and size, which should be litter
larger than the leaking area, put the patch on leaking area and press firmly.
e) You can use it again after 24 hours drying of the repaired position.
If the damage is bigger than 1” (2.5cm), we recommend using a Silicone or rubber
based glue for repair. Please read warning statement on glue prior to use.
Shanghai Jilong Plastic Products Co. Ltd.
No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China
Tel: +86-21-58942200 E-mail: [email protected] Web: www.jilong.com
