Group
0+1
Group
II+III
Group
II+III
Group
0+1
Group 0+I: 5-Point Harness Installation
Step 6:
Non-rethread harness system adjustable with headrest: according to different height
of children, there are 8 levels to adjust the height of headrest and shoulder belt in Group 0+I.
There are 5 levels to adjust the height of headrest and shoulder belt in Group II+III. Before
adjustment, please loosen 5-point safety belt. Attention: after sitting, adjust the headrest to
the right position.
Step 7:
If the red line in the side of headrest exceeds the height of side car seat body, you
should use Group II+III installation.
6
Attention: One or two fingers is the best
distance from the bottom of headrest to
child's shoulders.
7
Higher than the base line
for the side car seat body
The base line for the side car seat body
Lower than the base line
for the side car seat body
Group 0+I: 5-Point Harness Installation
1
2
Step 1:
Press the central adjuster and
meanwhile, pull out the harness strap
to release shoulder belt.
Step 2:
Press the red button to open the
harness buckle.
Step 3:
Pull out both of the shoulder belts
to both sides of the child safety seat.
Step 4:
Place your child into seat and make
sure the lap belt can restrict the position of
pelvis. Please check the height of shoulder
belts. It is better to make shoulder belts be
a little bit higher than child's shoulders.
Step 5:
Pull harness adjustment strap outward to fix child and avoid harness strap to constrict
child too much. Adult palm can insert between harness strap and child's chest. Make sure the
tightness is comfortable for your child and ensure the lap belt restrict the position of pelvis.
Methods to use harness buckle: Guide the two buckle
latches together and engage them before putting them
into the harness buckle, this should make a click nose.
The buckle latches will be released if you press the red
button.
1
3
4
5
1
2
3
11
12
Summary of Contents for UPGO
Page 1: ...UPGO...
