Notice
Step 3:
Separate the shoulder belt with strap yoke: Put strap yoke into the rear cover and
draw out the belt forward.
Step 6:
Separate harness buckle and car seat (see 1 and 2 ).
Step 7:
Separate the strap with the seat: Separate strap yoke from the seat by hands or small
tools. Then draw out the belt and fix the strap yoke with the strap according to picture 1-2-3-4-5.
Step 8:
Close the rear cover, finish the removal of the 5-point safety belt like pictures.
Step 4:
Separate shoulder pads with belt: Draw out shoulder pads firstly, open the shoulder
pads and separate shoulder belts with strap yoke, then draw out the shoulder pads.
Step 5:
Open harness buckle,
put the buckle pad and cushion
aside.
Group 0+I: 5-Point Harness Removal
3
7
4
5
1
1
1
2
2
3
Group 0+I: 5-Point Harness Removal
1
1
2
Attention: When you install shoulder belt
and harness yoke, do not twist the strap.
Attention: When you install shoulder belt
and strap, you must make belts pass the
harness shaft.
13
14
1
2
3
4
5
Step 1:
Adjust the baby car
seat to level 1.
Step 2:
Push central adjuster
and loosen the belt. Then,
adjust headrest to level 3 or
level 4 or level 5.
6
1
2
8
1
Summary of Contents for UPGO
Page 1: ...UPGO...
