Removing the Cover
1. Removing the cover of car body
2. Removing the cover of headrest
Washing Instructions
Do not use solvents, chemical cleaners and lubricants
Hand Wash
using the water
under 30℃
Do not Bleach
Do not
Machine Dry
Do not Iron
1
2
1
1
Attention
When you are ready to refit, make the steps in the opposite order.
1
2
3
4
5
6
Cleaning and Maintenance
17
18
Step 1:
As shown in figure 1, open the snap
button in the headrest.
Step 2:
As shown in figure 2, separate the
elastic with the headrest (see point 2).
According to point 3, separate elastic with
the frame. Then, remove the cover as shown
in Arrow 4.
As shown in picture, remove the
cover according to the order of
1, 2, 3, 4, 5.
Regularly check all important parts for damage. Make sure that
the mechanical components in particular are all in perfect
working order. If there is damage about your child safety seat
in the event of an accident, in this case the safety seat must
be replaced.
Store the child safety seat in a safe, dry place when it will
not be used for an extended period of time.
Brush away loose debris using a soft bristled brush to clean
the safety belt and plastic components, and then ventilate or
dry them.
If food or beverage drips on your seat belt, thoroughly rinse
it using warm water and then ventilate or dry it.
Remove and wash the cover see the instructions of cleaning.
If wash the cover in the fist time, the cover might fade a
little bit, It is a normal phenomenon.
In the circle 2, take the cover
down from the four plastic
hooks in the buttom of car
seat. When you refit the cover,
you also should fix the cover
by four plastic hooks.
Attention
Summary of Contents for UPGO
Page 1: ...UPGO...
