[6]
SERVICE & REPAIR INFORMATION
BLADE TEETH REPLACEMENT INSTRUCTIONS –
When replacing
blade teeth, the beveled edge of teeth and the head of the capscrews
should face the ice. The stamped part number on the teeth should face
away from the ice, as shown in the diagram. Use two 7/16” wrenches to
remove the cap screws. When attaching blades, finger tighten all
fasteners, then fully tighten with wrenches.
CAUTION – THE BLADE TEETH ARE SHARP AND SHOULD
BE HANDLED CAREFULLY TO AVOID FLESH CUTS OR
INJURY.
Blade Warranty
Instructions:
1.
Please send the following information:
Name,
Address,
City, State/Province, Zip/Postal Code,
Country,
Telephone Number,
Email Address,
Date of Purchase
Jiffy® Serial Number
2.
Send sales receipt, UPC label
( No Photocopies),
three
Stealth STX™ Blades or the Ripper™ blade and
$17.95
in
US dollars for return Shipping and Handling to:
Feldmann Engineering & Mfg. Co. Inc.
520 Forest Avenue
Sheboygan Falls, WI 53085 USA
Jiffy® Blade Warranty –
●
One Time Sharpening or Replacement
●
Expires Two Years after Date of Purchase
Please Allow 3 Weeks for Delivery!
ENGINE SPEED – NEVER TAMPER WITH ENGINE SPEED
CONTROL SYSTEM, OVERSPEEDING THE ENGINE CAN BE
DANGEROUS AND MAY CAUSE PERSONAL INJURY OR
DAMGE TO UNIT. TAMPERING WITH ENGINE SPEED
CONTROL SYSTEM WILL VOID ENGINE WARRANTY.
For
engine
adjustments, repairs or warranty service not covered in this
manual, visit our web site at www.jiffyonice.com,visit one of our authorized
Jiffy service, or for Canadian customers, please call 1-800-861-9559.
When requesting warranty service, Jiffy® ice drill proof of purchase (sales
receipt) establishes the date of sale and the start of the warranty period.
