![background image](http://html1.mh-extra.com/html/jiehao/inen-6102/inen-6102_user-manual_3997075009.webp)
JXDH-6102 User Manual
Chengdu Jiexun Electronics Co.Ltd,
H
ttp://
WWW.JIE-XUN.COM
E
8
When the device adopts united way, the grounding resistance should be
smaller than 1
Caution:
Before connecting power cord to Encoder, user should set the power switch to “OFF”
.
2.4 Signal Wire Connection
The signal connections include the connection of input signal wire
and the connection of output signal wire. The signal connection wire are
both ASI.
2.4.1 ASI Input Connection
User can find ASI IN1-IN8 input port on the Equipment, according to connector mark
described in the rear panel illustration, and then, connecting the Q9 coaxial cable, one end to
the ASI IN1-8 and the other end to the Encoder’s or other equipment ASI output port.
2.4.2 ASI Output Port Connection
User can find ASI output port on the Equipment, according to connector mark described
in the rear panel illustration, and then, connecting the ASI cable (in the accessories), one end
to the JXDH-6102 multiplexer’s ASI output port and the other end to the scrambler’s or
Modulator’s input port. multiplexer’s ASI output port and its connected ASI cable connector
illustrated as follow: