Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
CARINO (EN) February 2020
12
« ECO » mode
In case of manual working, it is possible to only work with the front burner and, therefore, reduce
the gas consumption of approximately 43 % while keeping a high flame. To do so, push
simultaneously on "SET" and low flame button.
To start again the back burner, push simultaneously on "SET" and high flame button (AUX appears
on the remote control display).
6.2
Thermostatic mode
In this working mode, the remote control acts as the thermostat. According to the room
temperature detected, it handles automatically the working of the insert to reach the setpoints
temperatures.
Before using this mode, you must settle the setpoints temperatures wished. To do so, go to
point 2.2. Note that the device must be in sleeping mode to start thermostatic mode (pilot on,
burners off). To put the device in sleeping mode, go to point 6.1.
To work on day temperature, push twice on SET button of the remote control. "TEMP" mode and
appear on display.
To work on night temperature, push 4 times on SET button of the remote control. "TEMP" mode and
appear on display.
2x
4x
Summary of Contents for CARINO 67
Page 48: ......
