Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
CARINO (EN) February 2020
10
4.
Starting the device
Note: The first firing must be done by the installer. Respect the important notes mentioned in
chapter "IMPORTANT" at the beginning of this manual.
-
Check the manual button of the valve is on position « ON »
-
On the remote control, push simultaneously on start/stop and high flame button. A beep
comes from the receptor.
1.
Push on « RESET » button on the receptor of the
insert until 2 beeps are heard (a short and then a
longer one).
Release the « RESET » button
2.
Push on «low flame» button on the remote control
within the 20 seconds. Two small beeps sound, they
confirm the setup. If one long beep is heard after
20 seconds, it means the setup has failed.
Summary of Contents for CARINO 67
Page 48: ......
