background image

ALL WARRANTY CLAIMS MUST HAVE PRE-APPROVED RATES, TIMES AND AUTHORIZATION NUMBERS 

PRIOR TO ANY FIELD WORK

IN ORDER TO BE ACCEPTED BY JH INDUSTRIES, INC. 

 
J  H  Industries,  Inc.  expressly  warrants  that  any  PIT  MOUNT  DOCK  LIFT  sold  by  it  will  be  free  from  defects  in  material  and  workmanship  under   
normal use for a period of one (1) year on all structural parts and six (6) months on all electrical and hydraulic parts from the earlier of, 1) sixty (60) 
days after the date of shipment, or 2) the date of installation of the PIT MOUNT DOCK LIFT by the original purchaser, provided the purchaser main-
tains and operates the PIT MOUNT DOCK LIFT in accordance with the Owners Manual.   
 
In the event that the PIT MOUNT DOCK LIFT proves to be defective in materials or manufacturing workmanship within the applicable period, J H 
Industries, Inc. will, at its option: 
 

1. 

Replace the PIT MOUNT DOCK LIFT or the defective portion thereof without charge to the purchaser, or 

 

2. 

Alter or repair the PIT MOUNT DOCK LIFT, on site or elsewhere, without charge to the purchaser. 

 
This  warranty  IS  EXCLUSIVE  AND  IS  IN  LIEU  OF  ALL  GUARANTEES  AND  WARRANTIES,  EXPRESSED  OR  IMPLIED  BY  ANYONE  OTHER 
THAN  J H Industries, Inc.  sole warranty obligation shall be as set forth above.  JH Industries, Inc. reserves the right at any time and only with prior 
written notification to change or alter the warranties expressed and provided. 
 
The warranty does not cover any failure caused by improper installation, abuse, misapplication, overloading, negligence, or failure to lubricate and  
adjust the EDGE-OF-DOCK properly. Parts requiring replacement due to damage resulting from vehicle impact, abuse, improper operation or lack of 
proper  protection  are  not  covered  by  this  warranty.  Seller  assumes  no  responsibility  or  liability  for  (1)  consequential  damages  of  any  kind  which  
result  from  the  use  or  misuse  of  the  PIT  MOUNT  DOCK  LIFT;  (2)  damage  or  failure  resulting  from  the  use  of  unauthorized  replacement  parts  or                
modification  to  the  PIT  MOUNT  DOCK  LIFT;  (3)  damage  resulting  from  the  misuse  of  the  PIT  MOUNT  DOCK  LIFT.  THERE  ARE  NO                 
WARRANTIES,  EXPRESSED  OR  IMPLIED,  WHICH  EXTEND  BEYOND  THE  DESCRIPTION  ABOVE.  THERE  IS  NO  WARRANTY  OF             
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.  

J H Industries, Inc. warranties extend only to the product itself. 
 
J H Industries, Inc. DISCLAIMS all liability arising out of the workmanship, methods and materials used by the installer. 
 
J H Industries, Inc. DISCLAIMS all liability for premature wear, product failure, property damage or bodily injury arising from improper  
installation or maintenance. 
 
WARRANTIES, whether expressed or implied, relating to workmanship and materials used in connection with the installation of  
J H Industries, Inc. products are specifically DISCLAIMED. 

Verify that this is the most current Installation, Operation and Service Manuals.  

To obtain an updated version please contact: 

JH Industries Inc. 

1981 E. Aurora Rd.  

Twinsburg, Ohio 44087 

(330) 963-4105 (Phone)  or 1-800-321-4968 (toll free) 

Or visit our website under EOD SEL to download and print an up to date  

version. 

INTRODUCTION 

 

Welcome, and thank  you for purchasing  your  Pit  Mount Dock Lift from Copperloy by JH Industries, Inc.  It is 

designed to give you many years of trouble-free operation.   
 

This manual contains information that is needed to operate and maintain the Pit Mount Dock Lift safely.  Each 

dock lift can be modified or designed to fit each customer’s needs, there are many options and accessories that can be 
added.    JH  Industries,  Inc.  cannot  anticipate  all  possible  applications  and  therefore  all  warnings,  instructions  and      
information expressed in this manual are not all-inclusive.   
 

This  manual  also  contains  a  complete  parts  list  and  information  about  ordering  replacement  parts.    JH         

Industries, Inc. has selected components for best fit and function for each of our products, therefore replacement parts 
should be identical to original equipment or have written approval for non-original equipment.  

JH  Industries,  Inc.  will 

not be responsible for equipment failures due to incorrect or non-approved replacement parts.

 

 
 

WARRANTY 

                                                                                                                             JH INDUSTIRES INC.  

Summary of Contents for Copperloy





























Reviews: