ENGLISH
38
PLAYING MP3 DISCS
•
Repeat the track:
When the
REPEAT/ENTER
(28) button is pushed once then the current track will be
continuously repeated. The control indicator
RPT
is shown in the display.
•
Repeat the Folder:
When the
REPEAT/ENTER
button is pushed twice then the current folder will be
continuously repeated. The control indicator
RPT FOLDER
is shown in the display.
•
Repeat the CD:
When the
REPEAT/ENTER
button is pushed three times, the CD will be continuously
repeated. The control indicator
RPT ALL
is shown in the display.
•
Random playback:
When the
REPEAT/ENTER
button is pushed four times, the tracks will be played in a
random order. The control indicator
RDM
is shown in the display.
•
Deactivating the playback modes:
Depending on the mode, you can press the
REPEAT/ENTER
button
repeatedly until the control indicator
RPT
,
RPT FOLDER
,
RPT ALL
or
RDM
is gone from the display. This
also deactivates the corresponding function. These playback modes are also deactivated when the disc is
stopped or otherwise interrupted.
The playback modes “RPT”, “RPT FOLDER”, “RPT ALL” and “RDM” can also be turned on when
playback is put on pause.
Playing a set program
•
This device offers the possibility of playing up to 99 tracks in a preset order. If desired, the same tracks can
be programmed more than once. To do this, proceed as follows.
•
Insert a disc into the CD compartment as previously described.
•
Switch the device to stop mode by pressing the button
/BAND
(25).
•
Press the button
CLOCK/PROGRAM
(35) once.
F00 P--01
and the control
indicator
MEM
will be shown in the display; the digits
F00
will blink.
•
Select a folder using the buttons
/
(29) and
/FOLDER-
(36) and confirm the selection with the button
CLOCK/
PROGRAM
.
T00
blinks in the display.
Fig. 16
•
Using the buttons
TUNING -/
(33) and
/
(26), choose which tracks of the disc you wish
to program and save them by pressing the button
CLOCK/PROGRAM
. The second memory location (
F00
P--02
) will be opened and can be set as previously described.
•
Once all of the 99 memory location spaces are taken, then
PROGFUL
will be shown in the display. All
memory location spaces do not have to be full to play the set program.
•
Playing a set program:
To play the preset program, press the button
PLAY/PAUSE
(32).
•
Stopping a set program:
Playback of the set program can be stopped by pressing the button
/BAND
once.
•
Deleting a set program:
The set program can be deleted by pressing the button
/BAND
twice or
by opening the CD compartment or switching to another operating mode. The control indicator
MEM
will
disappear from the display.
JGC-MS-8110-IM-DE-EN-V2.indb 38
24/08/2009 4:51 PM
