14
5d
5h
5f
b) Install the motor centralized on the rails (5h) and fasten
it with the four bolts + washers + nuts (5f), according
picture aside.
c) Make the alignment between the motor pulleys (5d)
and the machine (6), according instructions on page 30.
d) Install both of the belts (7) according illustrated and
adjust the tightening according instructions on page 31.
ATTENTION: Items 5d and 7 only accompany the
machines that leaves the factory with the motor.
a) Attach the first part of the belt cover (1) as figure
beside.
b) Place the pulley (2) of the machine.
WARNING: The cover belt is not included
with the machine when it leaves the
factory without a motor coupled.
Yo u c a n p u r c h a s e t h e s t a n d a r d
safeguards provided by JF.
The use of the equipment without the
required cover belt or guards is
prohibited, according to the page 7
indications.
4.4- Cyclone assembly (optional item)
If you prefer to install the cyclone assemble, install it according instructions below:
1
2
Summary of Contents for 5D
