JF 1600-AT S3, Instruction Manual, Page: 158 / 240

38
Instructions Manual
4. Preparation
1.
First, check that the lock pin (P) is in the
position shown in the figure on the side.
Put it on if it isn't;
2.
Hitch the side frame (A) to the three
hydraulic lift points on the tractor. Start
the coupling by the left arm (A), then the
right arm (B) and finally the third point (C);
3.
Lock the arms with the locking pins,
provided with the machine;
In order to facilitate the transport, generally,
the frame for side coupling of the harvester to
the tractor remains disassembled and folded,
as shown in the figure on the side.
For the side coupling of the machine,
assemble the side frame according to the
instructions below.
4.3.1- SIDE coupling
P
B
C
A
SIDE COUPLING
FOLDED SIDE
FRAME