JF 1000 AT, Operation & Technical Manual, Page: 75 / 92

JF 1000-AT
31
NOTE!
L
M
N
The figure on the side shows the head without
the two drums just to facilitate the location of the
screws. It is not necessary to disassemble the
drums to secure the head to the harvester.
1.
Assemble the head in the harvester, fitting it to
the two fasteners (L).
2.
Attach the platform to the machine with the 2
bolts and washers (M).
3.
Complete fastening with 2 bolts, washers and
nuts (N).
ASSEMBLY THE HEAD IN THE
HARVESTER
N = Hex bolt 7/16” x 2” (02 un)
N = flat washer Ø12 x Ø29 x 4.76 (02 un)
N = Hex nut 7/16” with nylon lock (02 un)
M = hex nut 7/16” with nylon lock (02 un)
M = flat washer Ø12 x Ø29 x 4.76 (02 un)