B-06-1006, Rev. E Tuff Tilt Digital
22
---------------------------------------
XY-SET-RSMODE,
x
Sets output protocol to RS232 or RS485(RS422), as follows:
x
= 0: RS232
x
= 1: RS485(RS422)
Syntax: *ttss XY-SET-RSMODE,
x
<CR><LF>
Error Strings: None.
Default: Set in factory to customer specification.
Persistence: Once initiated, remains in effect even with power cycle.
(Setting is stored in nonvolatile memory.)
Example:
command: *9900XY-SET-RSMODE,
0
<CR><LF>
response: <none>
CAUTION:
If you change the output protocol, you will no longer be able to
communicate with the tiltmeter unless you have the correct
interconnect cable.
---------------------------------------
XY-AUTOZ
Turns autozero function on, causing tiltmeter to subtract current X
and Y readings from all subsequent X and Y readings.
Syntax: *ttssXY-AUTOZ <CR><LF>
Error Strings: None.
Default: Off.
Persistence: Setting is stored in nonvolatile memory.
Example:
command: *9900XY-AUTOZ<CR><LF>
response: <none>
---------------------------------------
XY-AUTOZOFF Turns autozero function off, causing tiltmeter to display
non-biased (unshifted) position readings.
Syntax: *ttssXY-AUTOZ-OFF<CR><LF>
Error Strings: None.
Default: Off.
Persistence: Setting is stored in nonvolatile memory.
Example:
command: *9900XY-AUTOZ-OFF<CR><LF>
response: <none>
Summary of Contents for TuffTilt Digital
