JEWELL TuffTilt Digital, Manual, Page: 13 / 43

B-06-1006, Rev. E Tuff Tilt Digital 12
XY-SET-HYST,k Sets the control hysteresis.
XY-DUMP-SETTINGS
Dumps settings of device.
XY-DUMP2
Dumps extended settings of device.
4.4 Sample Data Using the XY Command
The most commonly used command is the XY command, which returns the X and Y tilt angles in
degrees and the internal temperature of the
Tuff Tilt Digital
in ºC. The format of the returned data depends on
the setting of the SO command. The returned data are averages of a series of readings. The number of
samples used in the average is set by the XY-SET-N-SAMP command. The following lines illustrate the
format of the data returned by the XY command for the range of possible SO settings:
SO = “ASH.” Ashtech compatible NMEA output string which returns the North-South (Y) and East-West
(X) tilt angle in degrees and the internal temperature of the MD-900-T in ºC:
$PASHS,XDR,A,004.261,D,N,A,004.280,D,E,C,021.288,C,T-N1346
$PASHS,XDR,A,004.261,D,N,A,004.280,D,E,C,021.306,C,T-N1346
$PASHS,XDR,A,004.261,D,N,A,004.280,D,E,C,021.298,C,T-N1346
$PASHS,XDR,A,004.261,D,N,A,004.280,D,E,C,021.332,C,T-N1346
SO = “SIM” (default). Simple X,Y,T,SN output which returns the X and Y tilt angle in degrees and the
internal temperature of the MD-900-T in ºC:
$-00.619,000.023,018.910,N0000
$-00.619,000.023,018.923,N0000
$-00.620,000.024,018.932,N0000
$-00.620,000.023,018.951,N0000
SO = “XDR.” Standard NMEA XDR output string which returns the North-South (Y) and East-West (X) tilt
angle in degrees and the internal temperature of the MD-900-T in ºC:
$YXXDR,A,000.034,D,N,A,-00.625,D,E,C,021.651,C,T-N0000*47
$YXXDR,A,000.034,D,N,A,-00.624,D,E,C,021.675,C,T-N0000*40
$YXXDR,A,000.034,D,N,A,-00.624,D,E,C,021.686,C,T-N0000*4C
$YXXDR,A,000.034,D,N,A,-00.625,D,E,C,021.707,C,T-N0000*45