Measurement and instrumentation
Evolio F6F12 / 1 A power supply
Ref :
281 003
ENGLISH
6
•
Operating temperature from 15°C to 40°C
•
Maximum relative humidity of 80% up to 31°C and 50% up to 40°C
•
Mains supply variations of +/-10%
•
Installation category II, pollution level 2.
4.2 Sectioning
It is the power plug that is used as a sectioning device.
4.3 Symbols used
: Caution, refer to accompanying documents.
: Caution, hot surface.
5 Care and maintenance
In case of a malfunction:
•
Check the mains voltage (230 V)
•
Check the open circuit voltages, without connecting any load
•
Wait 2 to 3 minutes for the protection against over-currents to be
turned on again.
Note:
In case of use in high ambient temperatures, the thermal protection
located in the primary of the transformer may get activated in exceptional
cases. In this case, disconnect the power supply and wait for 1 hour so that
the device cools down.
If the device still does not work, contact the After Sales Service.
In all cases,
do not open the device
.
Store the original packaging; it can be used to bring the device to our
workshops for maintenance, if necessary.
6 After-Sales
Service
This material is under a two year warranty and should be returned to our
stores in the event of any defects.
For any repairs, adjustments or spare parts, please contact:
JEULIN - TECHNICAL SUPPORT
Rue Jacques Monod
BP 1900
27 019 EVREUX CEDEX FRANCE
0825 563 563
Summary of Contents for Evolio F6F12/1A
Page 8: ......
