m1
Introduction
MagicTwin is a 2-User-System solution built on this special designed motherboard with a dual headed AGP
graphic card, two PS/2 keyboard and mouse Y-cables and one piece of software (Driver and Tools). It allows you
to add one additional station simultaneously running Windows XP Home or XP-Professional (Service Pack 1).
System Requirement
Jetway MagicTwin Motherboard:
2 x PS/2 Y-cable
Install CD (Driver and MagicTwin)
Serial Number and Activation Key
Purchased Separately from Dealer:
>=1.2 GHz Processor
Min 256MB DRAM
NVIDIA Dual Head AGP Graphic Card
Windows XP Home, Prof. w/ SP1
2 x PS/2 Keyboards
2 x PS/2 Mice
2 x Monitors
Necessary Components to Configure 2-User-System
¾
one special designed Motherboard with connectivity hardware onboard
¾
one dual head AGP graphic card (purchased separately from your dealer)
¾
two Y-cables for two PS/2 Keyboards and two PS/2 Mice
¾
MAGIC INSTALL CD (incl. all DRIVERS you need and some TOOLS to enable the 2-User function of
the motherboard). In addition this CD includes an auto detect software, which detects, installs and
assigns the related 2
nd
video display and the 2
nd
PS/2 keyboard and PS/2 mouse.
¾
one serial number and activation key (printed on the sticker label on top of the CD package folding seal)
¾
two
monitors
¾
two speaker systems (optional)
Recommendations
¾
CPU:
>1GHz
¾
minimum 256 MB RAM for two Stations, running simultaneously
¾
two Standard PS/2 Keyboards, -Mice and two Monitors (Sound: optional)
¾
Hard disk and CD-ROM drive
Installation of MagicTwin
¾
We recommend to install Windows XP and all related drivers from the scratch
¾
Switch off your PC and open the computer case
¾
Remove the AGP slot bracket and insert a dual headed AGP
Video Card purchased separately from your dealer into the AGP-
slot. If the delivered motherboard comes with dual VGA port
onboard, please skip this step.
Dual Port AGP VGA Card
¾
As well attach the delivered Y-cables to the “green” port (former PS/2 Mouse port) and into the “violet”
port (former PS/2 Keyboard port) at the rear side of the motherboard.
¾
Connect the 1
st
and 2
nd
mouse to the Y-cable, which is also linked to the “green” PS/2 connector and
the 1
st
and 2
nd
keyboard to the other Y-cable, which is also connected to the “violet” port. The additional
monitor MUST be attached otherwise windows will not detect and enable the 2
nd
monitor. Make sure the
additional keyboards and mice work; they should affect the host console.
¾
Start your PC. Windows will automatically detect the new AGP Video device as a standard VGA-card.
Please install first all drivers before installing “MagicTwin” of the MAGIC INSTALL CD. Insert the CD,
wait for the automatic start and run the Installation of all other drivers beside the MagicTwin from the
Magic Install CD. If the CD does not run automatically, please click to Start-> Run-> CD-Drive->
SETUP.EXE.
