34
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Hos Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 200MHz~233MHz
DRAM Clock at Next Boot is
This item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:
100MHz, 133MHz, 166MHz, 200MHz, By SPD
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.025V step by step from
0.7000V to 1.8V the Default setting is Default (CPU manufacturer Default setting).
AGP VddQ Select
This item allows you to select 1.5V of the AGP VGA card. The choice are: Default, 1.5V,
1.6V, 1.7V, 1.8V.
VDIMM Select
This item allows you to select DRAM Voltage. The choice are: 2.50V/2.6V/2.7V/2.8V.
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message
similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance system
operations.
3-13 Set Supervisor/User Password
