13
Pin 1
(3)
USB Port connector: USB1, USB2
The connectors are 4-pin connector that connect USB devices to the system board.
(4)
LAN Port connector: LAN
This connector is standard RJ45 connector for Network connector.
(5)
PS/2 Mouse & PS/2 Keyboard Connector: KBMS (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(6)
Parallel Port Connector (25-pin female): PRINT
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board
Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3
“INTEGRATED PERIPHERALS SETUP” section for more detail information.
(7)
Audio Line-In, Lin-Out, MIC Connector : CN1
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC
Line-out :
Audio output to speaker
Line-in :
Audio input to sound chip
MIC :
Microphone
Connector
(8)
Serial Port COM1: COM1/COM2
COM1/COM2 is the 9-pin D-Subminiature mail connector. The On-board serial port can be
disabled through BIOS SETUP. Please refer to Chapter 3 “INTEGRATED PERIPHERALS
SETUP” section for more detail information.
(9) Floppy drive Connector (34-pin block): FDC
This connector supports the provided floppy drive ribbon cable. After connecting the single plug
end to motherboard, connect the two plugs at other end to the floppy drives.
Floppy Drive Connector
Pin 1
FDC
LINE-OUT
LINE-IN
MIC
COM1
COM2
PS/2 Keyboard
UL_B
USB1
PS/2 Mouse PRINT
LAN
