Jetter AG
Mechanical installation | 5
JXM-IO-E32 User Manual
18 / 38
5.1.2 Prohibited mounting orientations
Any orientation where the connector plug is not protected against splash water or
condensation is prohibited.
Fig. 5:
Prohibited mounting orientation
NOTICE
Ingress of moisture in the case of incorrect mounting orientation
►
Protect the unit from splash water and condensation.
►
Do not lead the connector plug upwards.
►
Do not use a steam jet near the unprotected device.
5.2 Requirements for the installation location
Requirements for
the mounting sur-
face
Category
Description
Suitable materials
No special material requirements
Shape / quality
The contact surface must be plane.
Fastening eye
All existing fastening lugs must be screwed down.
The device can directly be fastened to the vehicle or
to a mounting plate.
Tab. 15:
Requirements for the mounting surface
Requirements for
the installation
space
■
Sufficient air circulation
■
Sufficient space between the device and parts that may become very hot
■
The device must be accessible for service work at all times.
INFO
Overheating due to incorrect mounting orientation
If the device switches itself off, check whether the device has overheated due to
an unfavorable mounting orientation.
