82
Jetter AG
7 File system
Further, this file lets you start the device plus its visualization feature.
updatelog.txt
This is a log file which is created during an OS update.
\Data
This directory holds the HMI's bulk data. The HMI lets you store parameter or
configuration files to this directory.
Important Note!
Larger amounts of data can be stored to this data partition. To speed up
system launch, this partition will be mounted a short instance, if needed, after
launching the STX application. Therefore, the STX application must not be
stored to this partition.
\SD
When you insert an SD memory card into the SD card slot on the HMI, the
dynamic directory named
\SD
is created. When no data storage medium is
inserted, this directory is not visible.
\System
This directory holds system-relevant files, such as the kernel, co-processor
firmware, configuration data, EDS, etc.
Directory
\Data
Directory
\SD
Directory
\System
