Jetter AG
39
JVM-507B
Mounting and installation of the JVM-507B
If no differential camera signal is applied, you must connect the respective video signal
x (-) with GND.
DC 12 V
DC 12 V
V+
V+
GND
GND
V-
To support differential video signals, an additional GND signal is required.
Connect V- on the camera or connect the JXM-MUX with GND.
The advantage of such a wiring is that it compensates noise.
DC 12 V
DC 12 V
V+
V+
GND
GND
V-
To satisfy EMC requirements, connect the video cable shield to the module
housing or to a free ground pin at the connector.
Connect the wire lug of the video cable with the latch of the module housing:
Note: Video signal
Preferred: Differential
video signal
Wiring instructions -
Video cable
