Jetter JM-108, User Manual, Page: 54 / 106

7 Description of Connections
54 Jetter AG
There are two motor cabling options:
7.3.1 Motor with male connector
Fig. 12: Motor with male connector
For the power connections and for the feedback, the motor has been equipped with
screw clamping terminals. With the help of prefabricated cables, the connection to
the JetMove 108 is established (See "Pre-fabricated motor cable with SC mating
connector" on page 56. and “Resolver Cable With Mating Connector” on page 71).
Motor specification: S, S-A, S-B or S-X for JH2 motors
7.3.2 Motor with screw clamping terminals and
cables with male connectors
Fig. 13: Motor with cables and male connectors
The motor is equipped with screw clamping terminals with cables for power and
feedback cables. In the type designation xxx.x,, the cable length is specified in
meters. At the cable ends, male connectors have been fixed that correspond to the
pre-fabricated JetMove 108 connection cables (See "Pre-fabricated motor cable with
SC mating connector" on page 56. und “Resolver Cable With Mating Connector” on
page 71).
Motor specification: S4-xxx.x for JH2 and JL1 motors