Jetter JM-108, User Manual, Page: 56 / 106

7 Description of Connections
56 Jetter AG
7.3.4 Pre-fabricated motor cable with SC
mating connector
The pre-fabricated motor cable is used with the variants “Motor with male connector”
on page 54 and “Motor with screw clamping terminals and cables with male
connectors” on page 54.
Mating connector of the motor (solder side)
Fig. 15: View on the SC series mating connector of the motor (internal thread
M23)
Note!
The suitable mating connector SC (female connector) can be ordered from
Jetter AG by supplying the following particulars:
Article # 15100070 Motor connector for the Jetter motor series JH2, JH3,
JH4, JH5, JL2, JL3, JL4, JK4, JK5, JK6 without brake
Article # 15100105 Motor connector for the Jetter motor series JH2, JH3,
JH4, JH5, JL2, JL3, JL4, JK4, JK5, JK6 with brake
Note!
The motor cable with the SC mating connector matching the Jetter motor series
JH can be obtained from Jetter AG. It is confectioned with the matching motor
mating connector and can be ordered by the following order reference:
Without Brake:
KAY_0626_xxxx
With Brake:
KAY_0624_xxxx